Limited Lifetime Warranty GacoDeck GacoDeck GacoRoof GacoShield

GacoDeck Frequently Asked Questions

General Information

 

Recoats and Substrates

 

Taping and Flashing

 

Using Your Deck

 

Weather Conditions and Trouble Shooting

 

Other Uses for GacoDeck Kit

 

How many square feet does the primer cover? How long does it take to dry?
The GacoDeck primer covers 200 square feet. The primer should be dry to the touch before applying the system.

How many square feet does the top coat cover?
133 square feet

How do you apply the system?
Complete instructions are inside the GacoDeck Kit bucket. They are also found at http://www.gacodeckkit.com/instructions.html

Is everything really in that 5-gallon bucket? Tape, granule, roller, DVD, paintbrush? How can it be in there without floating in the coating?
Trust us, it's all in there, and it's not floating in coating. The GacoDeck Kit package was specially designed to allow all of the components to fit (and remain secure and dry) in one container.

What kind of primer should I use for flashing?
You can use any standard metal primer available at your hardware store.

What kind of caulk is the best kind to use?
Acrylic, 50-year, paintable caulking which meets TT-S-002330C.

How do I clean up after application? Does the coating come out of clothing?
Use nornal precautions to avoid getting the coating on your skin (wear long pants, socks, long sleeves, and work gloves). If you do get GacoDeck coating on your skin, you can scrub it off with soap and water. GacoDeck coating will not come out of clothing or shoes.

Where can I find a location to purchase the GacoDeck Kit?
Enter your zip code in the dealer locator box, which you can find at the top left corner of this web page.  Stores within your selected search radius will be listed, along with address and phone number.

I live outside of your retail distribution area. Can I have the GacoDeck Kit shipped to me?
We will ship direct to customers outside of our retail area. Shipping charges range from $25.00 to $60.00.

What do I do with the bucket after I am finished?
You can leave the bucket uncovered overnight to allow the residual coating to dry. Pull the dry coating out of the bucket and dispose of it in your trash container. The dried coating is inert. The bucket can then be reused or recycled.

How can I know if I am applying the recommended coverage? How far does one roller full of coating cover?
We estimate that each roller-full should cover 4 sq. ft on the base coat. The first coat tends to soak into the wood more and does not cover as much area as the following coats. The next coats should cover 6-8 square feet per roller-full.

How do I know if my deck can be re-coated with the GacoDeck Kit system?
If the existing deck coating or membrane remains fully adhered to the substrate, it can be recoated.

Can I recoat over Hypalon® or urethane? What preparations should I make for an existing deck?
To prepare any deck for a new topcoat, it must be cleaned by pressure washing or thorough scrubbing with detergent and water. Rinse well and allow to dry 24 hours. If your existing deck coating is waterproof and in good condition, you may recoat the surface using one coat of GacoDeck Primer, followed by one or two coats of GacoDeck Topcoat for Maintenance. If the deck coating leaks, is worn, or has cracks or holes, you may recoat the surface. For decks with "alligator" cracks in the coated surface, or cracking at plywood seams, we recommend taking off the old tape with a sander using 80-grit sandpaper. After re-taping the seams, and caulking, apply a coat of GacoDeck Primer, followed by a full application of the GacoDeck Kit system.

What substrates should not be coated with the GacoDeck Kit system?
GacoDeck Kit will not go over torchdown, BUR, or on decks with no slope or standing water (¼-inch puddle for 1 week).

Why can't I use GacoDeck Kit over a torchdown roof?
The GacoDeck Kit coating is a much harder acrylic compared to other acrylic roofing products on the market. Most acrylic roof coatings are soft acrylics, which does not make for a good walking surface. For torchdown roofs that are not intended as walking surfaces, GacoRoof provides a bright white waterproof surface.

Can I apply the GacoDeck Kit over a clear sealed plywood such as Thompson Water-Seal or Wood-Life?
Wood sealers often contain paraffin, which prevents paint or coatings from adhering to the wood. If you have sealed your deck surface, you must use Strip XL, manufactured by Bio Wash, to strip off the sealer. Test the surface after stripping the sealer by spraying with water and seeing if the water still beads. If the water does not bead, the sealer has been stripped. After testing, allow the surface to dry for 24 hours.

How do I determine slope?
Gaco recommends ¼-inch slope. Check your slope with a level.

Will the tape show through the coating? How can I hide visible lines from the tape used on seams?
A seamless finish is easy to achieve. Lightly sand the edges of the tape with a medium grit sandpaper before the first base coat is applied. If you do not sand the edges of the tape, the seams may be visible after the deck is finished.

Is tape better than metal flashing at edges and termination points?
Both are equally preferable. Some types of siding will not allow metal flashing to fit up under the siding. For decks that abut this siding, tape must be used. On outside edges of your deck, we recommend metal flashing. Metal flashing creates a metal drip edge, to prevent water from running underneath the deck, and to prevent soiling the fascia board.

Should I caulk gaps in plywood? Should I caulk over nails or screws?
Butt the plywood sheets against one another. Fill in any gaps, including nail indentations, with caulk before taping or coating.

How long before furniture can be placed on the deck after the deck has been coated?
48 hours. We recommend that deck furniture have rubber tipped legs to avoid scraping the deck surface.

Can I put planters on my deck?
Yes, you may put planters on your deck. To avoid discoloring or damaging the GacoDeck Kit coated surface, planters must be up off the surface. Plant stands, rollers, or glass blocks can be used to lift planters and pots up off of the deck surface. Avoid puddles of water under planters or hanging baskets.

Can I have a hot tub on my deck?
There are two ways to purify and maintain the water in a hot tub. One is a chlorine-based system, and the other is a bromide-based system. Chlorine-based systems can cause damage and discoloration to the coating surface from hot, chlorinated water splashing on to the deck surface. Bromide-based systems (such as Baqua Spa) can be used with the GacoDeck Kit coating. It is always a good idea to minimize splashes of chemically-treated water on your deck surface. If splashes do occur, rinse the area with clean water.

Can I use the GacoDeck Kit system to add a skid-resistant surface around a pool?
Yes, the GacoDeck Kit system can be used around pool surrounds. It is always a good idea to minimize splashes of chemically-treated water on your deck surface, because repeated exposure to heavy doses of chlorine may enhance fading and embrittle the coating.

Can I use my barbeque on my deck?
Yes, you can barbeque on your deck. Take care to avoid any hot ashes or coals on the deck surface. If oil or soot collects on the deck surface, it may discolor. Wipe up any spills immediately.

My Deck Surface is still "Sticky" and has not cured. What should I do?: 
If the temperature drops more than 20° overnight after you coat your deck, your deck may not cure (harden) completely. Do not place heavy objects or furniture on your deck until it has cured! The following process removes small amounts of surfactents that can rise to the surface of a newly coated deck and inhibit curing time. If your deck coating is still sticky or tacky after 48 hours, wet the deck surface, apply an alkaline soap such as GacoDeck Wash or Simple Green, and agitate with a broom. Rinse the deck thoroughly and allow to dry. Within 48 hours, the deck surface should be cured.

I coated my deck in the afternoon, and early the next morning, I noticed that the surface appeared splotchy and stained. What happened? What can I do about it?
Although this condition looks unattractive, it will not have any effect on the life of the coating. It's known as surfactant leaching, or surfactant bleed. Surfactants are water-soluble additives that insure the stability of the latex coatings, and they are sensitive to moisture during the drying period. If the drying process is interrupted by moisture, such as dew, fog, rain or humidity, surface staining may occur. To treat surfactant bleed, wash the surface with household detergent and water and rinse well (the longer the stain remains on the surface, the more difficult it can be to remove). Allow the surface to dry and continue with your application. Surfactant bleed is not uncommon during the first 30 days after an application.

The GacoDeck Kit instructions say that the coating should be applied when no rain is imminent. I live in a rainy climate where rain is always imminent. Can I still apply the GacoDeck Kit?
Of course you can apply the GacoDeck Kit system. You may want to secure a large tarp over the area to be coated to protect the surface from rain and moisture.

I've been using textured black tape strips to make my stairs skid resistant, but the tape is always curling and coming up from the surface. Can I use the GacoDeck Kit to provide a skid-resistant surface on pressure-treated wood stair treads?
Yes you can! No primer, tape or caulking is required. For a small stairway, one box of GacoDeck Kit granule and one-gallon of GacoDeck Kit topcoat may be adequate. Remove any textured tape or adhesive that remains on the surface. Two coats of GacoDeck Kit coating should be applied. Then mix in the granules with the remaining coating, and apply two more coats to the stairway.

To get in touch with a Gaco product expert, use our contact form.

Subscribe to our Newsletter

For tips on installation, product news and more.