GACO DECKTAPE
POLYESTER REINFORCING TAPE
Description:
Gaco DeckTape is made of fusion bonded fabric polyester fibers laid in random orientation. It exhibits a high tensile strength, good elongation and a low profile. This tape has a parchment like texture.
Usage:
Plywood joints, concrete construction joints, concrete cracks, and joints between metal, fiberglass or insulation, and combinations of the above substrates in roof, deck and wall specifications. The Gaco DeckTape can also be used for flashing at changes of plane; however, installation into inside corners requires special care.
Color:
White
APPLIED PRODUCT DATA
Tensile:
ASTM D-412-68:
- 400 psi (2.76 MPa) Transverse
- 800 psi (5.52 MPa) Longitudinal
Elongation:
ASTM D-412-68, 60%
Adhesion:
ASTM D-903-49, Same as that of Primer used.
Solvent Swell:
None measurable.
Heat Shrinkage:
None after 6 months at 150°F (66°C).
PACKAGED PRODUCT DATA
Packaging:
4 inches wide, 120 feet per roll.
Thickness:
5 Mils (.127mm)
Storage:
Store in a cool, dry place.
APPLICATION
- To begin taping, brush on a 5-6” wide stripe of GacoDeck coating, centering the stripe over joints or cracks. Work in small sections, as Latex coatings dry quickly.
- While coating is still wet, embed polyester tape smoothly into the coating. Brush another layer of coating over the tape, smoothing out any wrinkles.
- Allow the surface to dry. For a seamless finish, lightly sand the edges of the coated tape with medium grit sandpaper before applying the first coat of GacoDeck.
