GACODECK TOP COAT
WATER BASED ELASTOMERIC COATING

Description:
Gaco Western’s GacoDeck Top Coat water-borne, single component elastomeric coatings are characterized by excellent hardness, strength, adhesion and water resistance.

Usage:
GacoDeck Top Coat is designed to maintain your GacoDeck waterproofing system. The GacoDeck Top Coat enhances an existing system by renewing color and increasing durability.

Standard Colors:
DT01 Oyster, DT02 Pewter, DT16 Shale, DT18 Adobe, DT47 Sedona, DT49 Desert.

 

APPLIED PRODUCT DATA

 

Weatherability:
Excellent color stability, gloss retention and chalk resistance.

Tensile:
ASTM D-412

• Stength: 900 psi min. (6.21 MPa)
• Elongation: 200% min.
• Permanent Set At Break: 15% max.

 

Hardness:
ASTM D-2240, 90 Shore A

Tear Resistance:
ASTM D-624 DIE C, Lb/In

• 250 min. (44.6 kg(f)/cm)

 

Water Vapor Permeability:
ASTM E-96
Method B, 100% R.H. Difference

• 0.06 Perm Inches

 

Toxicity
We believe cured coating to be non-toxic. However, confirming tests have not been conducted.

Adhesion:
Adheres well to most surfaces.

 

PACKAGED PRODUCT DATA

 

Coverage:
Sq. Ft./Gal./Mil

• 712 (17.49 m²/L/.02 mm)

 

Solids

• Weight: Method 4041, Fed. Std. 141, 57.36%
• Volume: 44.4%

 

V.O.C.: 
Volatile organic compounds content is 129 grams per liter.

Flash Point: 
Above 200°F (93°C). Tag Open Cup

Storage: 
Three years in original unopened container. Protect from freezing. Freezing temperature 29°F (-2°C). If frozen, thaw at 40 to 80°F (4°C to 27°C). If melted to a smooth, homogeneous condition, it is equal to original material. Do not allow material or surface of container to exceed 100°F (38°C). Gelation may occur.

 

APPLICATION

 

GacoDeck Top Coat products are water based coatings and require the complete evaporation of water to achieve cure. DO NOT apply to surfaces that are, or will be lower than, 50°F (10°C) within 6 hours.

Clean up using GacoDeck Wash or water mixed with liquid detergent.